Free Pattern Step-by-Step Crochet
Wearables

Midnight Galaxy Beaded Celestial Anklet Crochet Pattern

Make a stunning beaded crochet anklet with galaxy spiral motifs, moon, sun, star, and Saturn charms using bead single crochet and thread-weight cotton.

Level AdvancedTime 10-16 HoursHook 6 mmYarn Thread (Size 10 Crochet Cotton)
Midnight Galaxy Beaded Celestial Anklet Crochet Pattern

Pattern highlights

  1. Pre-string all your beads onto each thread color in the correct sequence before you pick up your hook.
  2. Work the main band flat in rows using bead single crochet, pushing a bead into place with every stitch.
  3. Once the band reaches its full length, work a scalloped edging round along the upper edge to form the wave silhouette.
  4. Create the galaxy spiral look by alternating bead colors in a spiral arrangement within each wave cell as you go.
  5. Crochet each of the four charms separately: crescent moon, sun with its pearl center, shooting star, and ringed Saturn.
  6. Attach the finished charms to the band using beaded chains so they dangle along the wave edge.
  7. Add the tie closure ends and secure the purple toggle bead for an adjustable, wearable fit.
  8. Weave in all loose thread ends and give every component a final check for secure bead placement before wearing.

About This Pattern

The Midnight Galaxy Beaded Celestial Anklet is a wearable piece of night sky, combining an undulating beaded wave band with swirling galaxy spiral motifs and four dangling celestial charms. What sets it apart is the sheer density of detail packed into such a small piece — every stitch along the band carries a bead, and the scalloped upper edge creates a rhythmic, wave-like silhouette that catches the light with each step. It's perfect for crocheters who love intricate, jewelry-scale work and want a genuinely show-stopping handmade accessory rather than a quick weekend make.

This pattern leans hard into bead-as-you-go bead single crochet, worked flat in rows with beads pre-strung onto Size 10 thread and pushed into place stitch by stitch. Expect to work five separate components — the main band, scalloped edging, and four individual charms (crescent moon, sun, shooting star, and ringed Saturn) — using a tiny steel hook. This is genuinely an advanced project: tight gauge, thread-weight yarn, in-the-round motif construction, and multi-color bead sequencing all come into play. Budget 10 to 16 hours total, including 2 to 3 hours just for bead pre-stringing and finishing.

Once assembled, the anklet measures about 9 inches long including its adjustable tie closure, with the beaded band itself spanning roughly 6.5 inches and standing 1.25 inches tall at its highest wave point. Each charm is delicate, only 0.75 to 1 inch at its longest point, yet packed with color and shimmer. The finished result feels more like fine beadwork than typical crochet — lightweight, sparkling, and richly detailed. It makes a spectacular gift for anyone who loves astronomy, celestial jewelry, or intricate handcrafted accessories that spark real conversation.

Variations

I fell hard for this anklet the moment the galaxy spirals started forming inside each wave cell — alternating those bead colors in sequence and watching a tiny nebula bloom on my hook is genuinely magical. There's something deeply satisfying about the bead-as-you-go bsc technique: sliding a bead up, tucking it snug against the last stitch, and watching the band glitter row by row. And then the charms! A crescent moon, a radiant gold sun with its pearl center, a shooting star with trailing tails, and a ringed Saturn worked in rainbow variegated thread — each one is its own tiny sculptural moment. Assembling all five components together at the end feels like completing a puzzle where every piece sparkles. This isn't a quick project, and I love that about it — it rewards patience with something you'll genuinely treasure, not just another quick makes-and-forgets accessory. If you love thread crochet, beadwork, or celestial themes, this one will absolutely steal your heart the way it stole mine.

Common mistakes

Stringing beads in the wrong order for the galaxy spiral motifs, which breaks the color sequencing pattern.
Before you begin stitching, lay out your bead sequence on a tray or bead mat and double-check it against your color plan for each wave cell, since bsc means beads go on in strict working order and can't be reordered once strung.
Working the bead single crochet too loosely, so beads sit crooked instead of snug against the stitch.
Push each bead firmly up against the hook before completing the stitch, and use a smooth, tightly plied thread like Lizbeth or DMC Cebelia so beads slide and seat cleanly rather than snagging on fuzzy fibers.
Losing tension consistency between the main band and the individual charms, resulting in mismatched gauge.
Since all pieces are worked at the same tight thread-weight gauge with the same size 7 steel hook, crochet a quick swatch charm first to confirm your tension matches before committing to the full band.
Rushing bead pre-stringing and running short mid-row, forcing a break in the beaded band.
Count and re-count your beads per color before starting each component, stringing a small buffer of extra beads beyond the estimated amounts so you never have to stop and restring mid-round.
Attaching the four charms in the wrong order or position along the band, throwing off the celestial theme's visual balance.
Dry-lay all four charms — moon, sun, shooting star, and Saturn — along the finished band before attaching any bead chains, adjusting spacing so the theme reads clearly from left to right.
Skipping the scalloped edging round or working it before the band is fully complete, distorting the wave silhouette.
Complete every row of the main band first and confirm it lies flat and even, then work the upper wave edging round last so the scallops form cleanly along a stable, finished edge.
Ruby

The story behind Stitch Obsession, and Ruby, who writes and tests every pattern on the shelf.

Advanced

Materials

  • You’ll need Size 10 crochet cotton thread, also called bedspread weight, in the following colors and amounts:

Color A

  • Deep navy blue, approximately 60 yards (55 m)

Color B

  • Royal purple, approximately 60 yards (55 m)

Color C

  • Silver or metallic white, approximately 40 yards (37 m)

Color D

  • Bright gold or amber, approximately 20 yards (18 m)

Color E

  • Rainbow or multicolor variegated for Saturn ring and shooting star, approximately 20 yards (18 m)

Yarn Suggestions

  • Lizbeth Size 10 Crochet Cotton by Handy Hands works beautifully with its smooth finish that allows beads to slide easily. Aunt Lydia’s Classic Crochet Thread Size 10 is widely available and affordable with consistent twist. DMC Cebelia Size 10 Crochet Cotton has a slight sheen that enhances the galaxy colorway.
  • Avoid fuzzy or loosely spun threads. They make bead pushing difficult and obscure stitch definition.
  • Deep navy blue (opaque): approximately 600 beads
  • Royal purple (opaque or metallic): approximately 600 beads
  • Silver-lined crystal or clear: approximately 400 beads

Metallic blue iris

  • approximately 200 beads

Opaque white

  • approximately 200 beads

Gold or amber opaque

  • approximately 150 beads

Bright orange opaque

  • approximately 100 beads
  • Rainbow or multicolor mix: approximately 150 beads
  • Small pearl or druk bead, gold, 6mm: 1 bead for sun center
  • Purple round bead, 8mm: 1 bead for band closure toggle
  • Steel crochet hook, size 7 (1.65 mm) for main band and charms
  • Steel crochet hook, size 6 (1.80 mm) optional for charms if your tension runs tight
  • Big-eye beading needle or twisted wire needle for pre-stringing beads
  • Beeswax or thread conditioner to prevent tangling
  • Scissors
  • Tapestry needle for weaving in ends
  • Stitch markers, 4
  • Clear nail polish or fabric glue for thread ends, optional

Crescent Moon Charm

Using color C (silver/metallic white) and size 7 hook, pre-string 120 silver-lined crystal beads and 80 white opaque beads onto the thread before beginning.

MR, ch 1.

  1. Round 1Work 6 bsc into MR, pull ring closed. (6 bsc)Rnd 2: Work 2 bsc in each st around using silver beads. (12 bsc)Rnd 3: (1 bsc, 2 bsc in next st) 6 times using silver beads. (18 bsc)Rnd 4: (2 bsc, 2 bsc in next st) 6 times using silver beads. (24 bsc)Rnd 5: (3 bsc, 2 bsc in next st) 6 times using silver beads. (30 bsc)Rnd 6: Work 1 bsc in each st around using silver and white beads alternating (1 silver, 1 white) to create the marbled moon face. (30 bsc)Now shape the crescent by working partial rows:Row 7: Ch 1, turn. Sk first 8 sts. Work 1 bsc in each of next 14 sts only using white beads. Leave rem 8 sts unworked. (14 bsc)Row 8: Ch 1, turn. Sc2tog, work 1 bsc in each of next 10 sts, sc2tog. (12 bsc)Row 9: Ch 1, turn. Sc2tog, work 1 bsc in each of next 8 sts, sc2tog. (10 bsc)Row 10: Ch 1, turn. Sc2tog, work 1 bsc in each of next 6 sts, sc2tog. (8 bsc)Row 11: Ch 1, turn. (Sc2tog) 4 times. (4 bsc)Row 12: Ch 1, turn. (Sc2tog) twice. (2 bsc)(6)
  2. Round 13Ch 1, turn. Sc2tog. (1 st) Fasten off, leaving a 6-inch (15 cm) tail. Moon star embellishment: Using color A (navy blue), join to any stitch near the center of the crescent open field. Work a 5-pointed star in surface slip stitch by drawing up loops in a star shape across 5 stitches. Fasten off. Weave in ends.

Checkpoint: The crescent moon charm should measure approximately 0.9 inches (2.3 cm) tall by 0.75 inches (2 cm) wide.

Sun Charm

Using color D (bright gold/amber) and size 7 hook, pre-string 100 gold beads and 80 bright orange beads.

MR, ch 1.

  1. Round 1Work 6 sc into MR, pull ring closed. (6 sc) No beads in this round. This will be covered by the 6mm gold pearl bead at center.Rnd 2: Work 2 bsc in each st around using gold beads. (12 bsc)Rnd 3: (1 bsc in next st, 2 bsc in next st) 6 times using gold beads. (18 bsc)
  2. Round 4(ray round): (1 bsc in each of next 2 sts, ch 4, sl st in 2nd ch from hook, sl st in next 2 ch, sl st back into same st to form ray spike) 9 times, using orange beads for the bsc and gold beads pre-strung onto the chain stitches of each ray. (9 rays made, 18 bsc base sts used, returning to 18 base sts after each ray)Rnd 5: Work 1 bsc in each of the 18 base sts around using gold beads, working behind the rays. (18 bsc)Rnd 6: (Sc2tog) 9 times, do not use beads in this round. (9 sts) Thread the 6mm gold pearl bead onto the working thread and slip it through the center of the disc. Pull tight to seat the pearl at the center front. Fasten off. Thread tail through all 9 remaining sts, pull tight to close the back. Weave in ends.

Checkpoint: The sun charm should measure approximately 0.85 inches (2.2 cm) across at its widest point including rays.

Shooting Star Charm

Using color B (royal purple) and size 7 hook, pre-string 60 purple beads, 60 silver-lined crystal beads, and 30 rainbow mix beads.

Star body: MR, ch 1.

  1. Round 1Work 5 bsc into MR, pull ring closed. (5 bsc)Rnd 2: Work 2 bsc in each st around using purple beads. (10 bsc)Rnd 3: (1 bsc, 2 bsc in next st) 5 times using purple and silver alternating. (15 bsc)Rnd 4: Work 1 bsc in each st around using silver beads. (15 bsc)Rnd 5: (Sc2tog, 1 bsc in next st) 5 times using silver beads. (10 bsc)Rnd 6: (Sc2tog) 5 times. (5 sts) Fasten off, leaving a long tail. Thread tail through all 5 sts to close.Tail trails (3 separate bead chains): For each trail, join color B at a stitch near the base-right side of the star.Trail 1 (longest): Ch 1. Work 14 bsl sts in a line using rainbow mix beads. Fasten off.Trail 2 (medium): Join at adjacent stitch. Work 10 bsl sts using rainbow mix and purple beads alternating. Fasten off.Trail 3 (shortest): Join at next adjacent stitch. Work 7 bsl sts using purple beads. Fasten off.(5)

Checkpoint: The shooting star charm (body plus longest trail) should measure approximately 1.25 inches (3.2 cm) total.

Saturn Charm

Planet body:

Using color A (deep navy blue) and size 7 hook, pre-string 80 navy beads, 50 purple beads, and 50 gold beads.

MR, ch 1.

  1. Round 1Work 6 bsc into MR using navy beads, pull ring closed. (6 bsc)Rnd 2: Work 2 bsc in each st around using navy beads. (12 bsc)Rnd 3: (1 bsc, 2 bsc in next st) 6 times using navy and purple alternating. (18 bsc)Rnd 4: (2 bsc, 2 bsc in next st) 6 times using purple beads. (24 bsc)Rnd 5: Work 1 bsc in each st around using purple and gold beads alternating. (24 bsc)Rnd 6: (2 bsc, sc2tog) 6 times using gold beads. (18 bsc)Rnd 7: (1 bsc, sc2tog) 6 times using navy beads. (12 bsc)Rnd 8: (Sc2tog) 6 times using navy beads. (6 sts) Stuff lightly with a small piece of scrap thread to give slight dimension. Fasten off. Thread tail through all 6 sts to close.Saturn ring: Using color E (rainbow variegated) and size 7 hook, pre-string 120 rainbow mix beads.Ch 29. Sl st in the first ch to form a ring. (29 ch ring)(6)
  2. Round 1Ch 1. Work 1 bsc in each ch around. Sl st to first bsc to join. (29 bsc)(29)
  3. Round 2Ch 1. Work 1 bsc in each st around using rainbow beads. Sl st to join. (29 bsc) Fasten off, leaving a long tail.Thread the planet body through the ring so the ring sits at an angle across the equator of the planet, tilted approximately 30 degrees. Use the tail to tack the ring to the planet body at two points, top and bottom of the planet, to hold the angled position. Weave in ends.

Checkpoint: The Saturn charm should measure approximately 1 inch (2.5 cm) wide at the widest point of the ring.

Main Band

Pre-stringing guide: The main band is 65 stitches wide and 15 rows tall. Total beads per row: 65. Pre-string each row separately in the Spiral Galaxy Fill Stitch sequence for rows 1 through 15.

Rows 1, 3, 5, 7, 9, 11, 13, and 15 are right side facing rows. You work with wrong side facing you so beads show on right side. Rows 2, 4, 6, 8, 10, 12, and 14 are wrong side facing rows. You work with right side facing you and beads appear on wrong side, which is the interior of the band and will not be visible when worn.

For simplicity, only right side rows carry the full spiral galaxy bead sequence. Wrong side rows use a single background bead color, deep navy blue throughout.

Foundation chain:

Using color A (deep navy blue) and size 7 hook, ch 67. This creates 65 working stitches plus 2 turning chains for setup. The foundation chain is not a beaded row.

Row 1 (RS setup, WS facing you for bead placement): Ch 1, turn. Work 1 bsc in the 2nd ch from hook and in each ch across using the pre-strung galaxy bead sequence for Row 1. (65 bsc)

Row 2 (WS row, RS facing you): Ch 1, turn. Work 1 bsc in each st across using deep navy blue beads only. (65 bsc)

Row 3 (RS row, WS facing you): Ch 1, turn. Work 1 bsc in each st across using pre-strung galaxy bead sequence for Row 3. (65 bsc)

Row 4 (WS row): Ch 1, turn. Work 1 bsc in each st across using deep navy blue beads only. (65 bsc)

Row 5 (RS row): Ch 1, turn. Work 1 bsc in each st across using pre-strung galaxy bead sequence for Row 5. (65 bsc)

Row 6 (WS row): Ch 1, turn. Work 1 bsc in each st across using royal purple beads only. (65 bsc)

Row 7 (RS row): Ch 1, turn. Work 1 bsc in each st across using pre-strung galaxy bead sequence for Row 7. (65 bsc)

Row 8 (WS row): Ch 1, turn. Work 1 bsc in each st across using royal purple beads only. (65 bsc)

Row 9 (RS row): Ch 1, turn. Work 1 bsc in each st across using pre-strung galaxy bead sequence for Row 9. (65 bsc)

Row 10 (WS row): Ch 1, turn. Work 1 bsc in each st across using silver-lined crystal beads only. (65 bsc)

Row 11 (RS row): Ch 1, turn. Work 1 bsc in each st across using pre-strung galaxy bead sequence for Row 11. (65 bsc)

Row 12 (WS row): Ch 1, turn. Work 1 bsc in each st across using silver-lined crystal beads only. (65 bsc)

Row 13 (RS row): Ch 1, turn. Work 1 bsc in each st across using pre-strung galaxy bead sequence for Row 13. (65 bsc)

Row 14 (WS row): Ch 1, turn. Work 1 bsc in each st across using deep navy blue beads only. (65 bsc)

Row 15 (RS row): Ch 1, turn. Work 1 bsc in each st across using pre-strung galaxy bead sequence for Row 15. (65 bsc)

Do not fasten off. Proceed to the Upper Wave Edging.

Checkpoint: After Row 15, the main band should measure approximately 6.5 inches (16.5 cm) wide and 1.25 inches (3.2 cm) tall, not including the foundation chain edge.

Upper Wave Edging (Scalloped Edge)

This round creates the undulating upper silhouette visible in the finished anklet. It is worked along the top edge from the right side.

  1. Round 1Pre-string for edging: Using color B (royal purple), pre-string the following bead sequence for the scallop pattern. For each wave repeat of 13 stitches, string 2 silver, 3 purple, 5 navy, 3 purple, 2 silver beads. That’s 15 beads per repeat times 5 repeats equals 75 beads. The extra beads accommodate the chain stitches in the scallop peaks.Turn work so right side is facing you. Join color B at the right end of Row 15.Edging setup: Ch 1 (does not count as a stitch).Wave repeat instructions: The 65 stitches of the top edge divide into 5 wave cells of 13 stitches each.

For each wave cell, work as follows:

  1. Round 2Sl st in next st (valley), bsl st in next st, sc in next st, hdc in next st, dc in next st, ch 3 (peak chain), dc in same st as last dc, hdc in next st, sc in next st, bsl st in next st, sl st in next st, sl st in next st. (13 stitches worked per cell with 1 peak)Repeat wave cell sequence across all 5 cells. (5 complete wave scallops across the top edge)Fasten off color B. Weave in end.

Checkpoint: After the Upper Wave Edging, the top of the band should have 5 clearly defined wave peaks. Each peak rises approximately 0.4 inches (1 cm) above the band body.

Attachment Bead Chains

Each charm is connected to the lower edge of the band via a short bead chain of approximately 8 to 10 stitches.

For each charm: 1. Join color B at the marked lower-edge attachment stitch.

2. Work a chain of 9 bsl sts using purple and silver beads alternating, creating a dangling connector chain approximately 0.75 inches (2 cm) long.

3. At the end of the chain, use the tail to sew through the top stitch of the corresponding charm twice.

4. Knot securely. Weave in all ends. Apply a small drop of clear nail polish to the knot if desired.

Attachment order from left to right: Position 1 (stitch 11): Crescent moon charm Position 2 (stitch 24): Sun charm Position 3 (stitch 38): Shooting star charm

Position 4 (stitch 53): Saturn charm

Tie Closure

Leave thread tails of at least 8 inches (20 cm) at each short end of the band when fastening off.

At each end, gather the thread tails and any extra lengths of color B added to bulk up the tie. Using the 4 to 6 thread strands at each end, work a simple 3-strand braid or flat macrame knot sequence for approximately 2.5 inches (6.4 cm). Tie an overhand knot at the end of each braid.

Thread the 8mm purple bead onto one of the ties to serve as a toggle. To fasten, wrap the toggle tie around the ankle and loop the plain tie through the bead to close.

Alternatively, the two short ends of the band may be slip-stitched together with color A to create a permanent loop, omitting the tie closure.

Assembly

  1. Step 11. Weave in all remaining ends securely using a tapestry needle, running each end through at least 1 inch (2.5 cm) of stitches in two directions.
  2. Step 22. To block: Dampen the finished anklet gently with cool water. Pin flat on a foam blocking mat with the right side facing up, stretching the band lightly to the stated dimensions. Allow to dry completely before removing pins. Do not iron.
  3. Step 33. Apply a thin coat of clear nail polish or jewelry sealant to any knots that secure charm attachment points for added durability.
  4. Step 44. The pendant charms may be stiffened lightly with diluted craft stiffener spray if desired.

Important notes

💡 Pre-string every single bead for a component before you pick up your hook; bead-as-you-go bsc doesn't allow you to add beads mid-row, so plan your full color sequence in advance.

💡 Choose a smooth, tightly spun Size 10 thread like Lizbeth or DMC Cebelia rather than anything fuzzy — loosely spun threads make beads difficult to push into place and blur your stitch definition.

💡 Work in good, bright light with a bead mat or shallow dish so stray beads don't roll away, especially when managing five different bead colors across the band and charms.

💡 Set aside dedicated time for the 2 to 3 hours of bead pre-stringing and final assembly separately from active stitching time, since rushing this stage is where most tension and sequencing mistakes happen.

💡 Keep the 8mm purple round toggle bead and 6mm gold pearl bead set aside early so they're not accidentally mixed into your working bead supply, since they're used only for the closure and sun center.

FAQ

How long does the Midnight Galaxy anklet actually take to make?

Plan for 10 to 16 hours total. The main band takes about 3 to 4 hours once beads are pre-strung, each of the four charms takes 30 to 90 minutes, and bead prepping plus final assembly adds another 2 to 3 hours.

What size hook do I need for this pattern?

You'll use a steel crochet hook size 7 (1.65 mm) for both the main band and all four charms. A size 6 (1.80 mm) hook is an optional alternative if your natural tension runs tight.

Can I substitute the recommended thread brands?

Yes, as long as you choose a smooth, tightly plied Size 10 (bedspread weight) crochet cotton — Lizbeth, Aunt Lydia's Classic, and DMC Cebelia all work well. Avoid fuzzy or loosely spun threads since they make bead pushing difficult and obscure stitch definition.

How big is the finished anklet?

The completed anklet measures about 9 inches long including ties, with a wearable circumference of roughly 7 to 8 inches, adjustable via the tie ends. The band itself is about 6.5 inches long and 1.25 inches tall at its highest wave point.

Is this a good pattern for a beginner in bead crochet?

No, this pattern is rated advanced and assumes comfort with pre-stringing beads, placing them into stitches, and working at a very tight, small gauge with thread-weight yarn. If you're new to bead crochet, practice bead single crochet on a simple swatch before attempting the full anklet.

The next find, by post

One pattern from the collection when it is ready. Nothing else.