
A structured handbag with a folded bow detail
A cotton crochet handbag built for structure, with a folded bow and real hardware.
- Level
- Intermediate
- Time
- 4-6 hours
- Hook
- 3.5 mm
- Yarn
- Worsted

Pattern highlights
- Swatch first, since this pattern depends on a tight, dense fabric to hold its shape.
- Work each side panel flat in single crochet, straight across with no shaping, to about 3.5 by 6.5 inches.
- Crochet the long bow strip, then fold it in half and whip stitch the short ends into a loop.
- Chain and work the second, smaller bow loop the same way to form the bow's center wrap.
- Fit in a stiff base, plastic canvas or cardboard, so the bottom stays flat under weight.
- Add the lining fabric if you're using it, then attach the hardware: D-rings, swivel clasps, and the turn lock.
- Weave in every tail before the bag goes anywhere near actual use.
About This Pattern
I keep a shelf in my notebook for bags that act like real bags, not soft sacks that collapse the moment you set them down. This one belongs there. It leans on cotton yarn and a smaller hook than you'd expect, which is the whole trick for getting fabric that holds its own shape without wire or boning.
The technique here is plain single crochet, worked flat, row after row, with the drama saved for the bow. Side panels go up in straight columns with no shaping at all. The bow piece is longer, folded in half, and whip stitched at the short ends into a loop, which is a neat bit of origami for yarn.
What comes off the hook is a bag with real hardware: a turn lock clasp, D-rings, swivel clasps for the handle. It is meant to carry things. Lining fabric and a stiff base, plastic canvas or cardboard, keep the bottom from dishing in once you load it up.
Worth knowing
I like projects that ask for restraint in one place and reward it in another. The side panels here are almost meditative: single crochet, straight edges, no counting shaping rows. Then the bow piece shows up and you fold it, whip stitch a seam closed, and suddenly you're doing light construction instead of just stitching. Working at 18 stitches and 20 rows to 4 inches with a 3.5mm hook on worsted cotton gives you fabric dense enough to trust with a clasp and real hardware. It feels less like a swatch project and more like building something. The second bow loop, worked from its own starting chain, means you get to repeat the fold-and-seam trick and actually see the bow take shape in your hands.
Common mistakes
- Sticking with the recommended worsted hook size Use the 3.5mm hook called for, smaller than typical for worsted weight, to get the dense fabric the bag needs.
- Skipping the gauge swatch Check that you're getting 18 stitches and 20 rows to 4 inches in single crochet before starting the panels.
- Whip stitching the bow loop loosely Keep the whip stitch seam on the bow piece tight and even, since it is what holds the folded loop's shape.
- Forgetting the second bow loop is separate Work it from its own starting chain rather than trying to fold one piece into both loops.
- Leaving the bag without a stiff base Cut plastic canvas or cardboard to fit before assembly, or the bottom will dish in once the bag is loaded.
Progress Tracker
0 of 0 rounds
Tap a round to tick it off — your place is saved on this device.
The kit
Yarn
- Approximately 400 to 450 grams of worsted weight cotton yarn or cotton blend
- The sample uses a gorgeous mustard gold shade
- Cotton or cotton blend is strongly recommended for structure and durability
Hook
- 3.5mm crochet hook (or size needed to achieve gauge)
- Using a smaller hook than typically recommended for worsted weight creates the dense fabric
Notions
- Tapestry needle for weaving ends
- Stitch markers
- Turn lock clasp with leather tab (approximately 3cm wide)
- Two D-rings (15mm)
- Two swivel clasps for handle attachment
Optional
- fabric for lining
Optional
- plastic canvas or cardboard for base structure
- Gauge
- 18 stitches and 20 rows = 4 inches in single crochet with 3.5mm hook
- Gauge matters for this pattern. A bag that is too loose will not hold its shape. Work a gauge swatch and adjust your hook size if needed. Your fabric should be tight enough that you cannot easily see through it.
- Finished Dimensions
Width
- approximately 9 inches (23cm)
Height
- approximately 6.5 inches (16.5cm)
Depth
- approximately 3.5 inches (9cm)
Handle drop
- approximately 4 inches (10cm)
Notions
Tapestry needle for weaving ends Stitch markers Turn lock clasp with leather tab (approximately 3cm wide)
Two D-rings (15mm)
Two swivel clasps for handle attachment Optional: fabric for lining Optional: plastic canvas or cardboard for base structure
Gauge 18 stitches and 20 rows = 4 inches in single crochet with 3.5mm hook
Gauge matters for this pattern. A bag that is too loose will not hold its shape. Work a gauge swatch and adjust your hook size if needed. Your fabric should be tight enough that you cannot easily see through it.
Finished Dimensions Width: approximately 9 inches (23cm)
Height: approximately 6.5 inches (16.5cm)
Depth: approximately 3.5 inches (9cm)
Handle drop: approximately 4 inches (10cm)
Abbreviations ch = chain: wrap yarn over hook and pull through loop on hook sc = single crochet: insert hook, yarn over, pull up loop, yarn over, pull through both loops inc = increase: work 2 single crochet stitches into the same stitch
dec = decrease: insert hook into stitch, pull up loop, insert hook into next stitch, pull up loop, yarn over, pull through all 3 loops sl st = slip stitch: insert hook, yarn over, pull through stitch and loop on hook st(s) = stitch(es)
RS = right side WS = wrong side Pattern Notes
This bag is constructed from several flat pieces that are seamed together. Working in pieces gives you cleaner edges and more control over the final shape. All pieces are worked in rows of single crochet through both loops unless otherwise noted.
The tight gauge is essential. Do not skip the gauge swatch. I know it is tempting, but trust me on this one.
When counting rows, remember that your starting chain does not count as a row. Row 1 is your first row of single crochet worked into the chain.
Crochet Handbag Pattern Instructions Front Panel Ch 42.
Step by step: Ch 42.
Round 1Sc in 2nd ch from hook and in each ch across. (41 sts)to 12: Ch 1, turn. Sc in each st across. (41 sts) Border Round: Ch 1, do not turn. Work sc evenly around all four edges, placing 3 sc in each corner. Sl st to first sc to join.Step by step: Fasten off. The flap will attach to the back panel and fold over the front; Bow Assembly.
The bow is the signature element of this handbag. It consists of three pieces: the main bow loop, a second bow loop, and the center wrap.
Step by step: Main Bow Loop Ch 26.
to 16: Ch 1, turn. Sc in each st across. (41 sts) Fasten off. This creates a rectangle approximately 9 inches by 3.5 inches.
Step by step: Side Panels (make 2); Ch 16.
Step by step: to 32: Ch 1, turn. Sc in each st across. (41 sts) Fasten off and weave in ends; Bottom Panel Ch 42.
Round 2to 32: Ch 1, turn. Sc in each st across. (41 sts) Fasten off and weave in ends. You should have a rectangle approximately 9 inches wide by 6.5 inches tall.
Back Panel Work exactly the same as the Front Panel.
Ch 42.
Part 5
Round 1Sc in 2nd ch from hook and in each ch across. (15 sts)
Round 2to 32: Ch 1, turn. Sc in each st across. (15 sts) Fasten off. Each side panel should measure approximately 3.5 inches wide by 6.5 inches tall.
Part 7
Round 1Sc in 2nd ch from hook and in each ch across. (25 sts)
Round 2to 50: Ch 1, turn. Sc in each st across. (25 sts) Fasten off, leaving a long tail for seaming. Fold the piece in half with wrong sides together and whip stitch the short ends together to form a loop.Second Bow Loop Ch 22.
Part 8
Round 1Sc in 2nd ch from hook and in each ch across. (21 sts)
Round 2to 40: Ch 1, turn. Sc in each st across. (21 sts) Fasten off, leaving a long tail. Seam short ends together to form a smaller loop.Center Wrap Ch 8.
Part 9
Round 1Sc in 2nd ch from hook and in each ch across. (7 sts)
Round 2to 20: Ch 1, turn. Sc in each st across. (7 sts) Fasten off, leaving a long tail.
Assembling the Bow
Flatten the main bow loop with the seam at the back center. Pinch the center to create the bow shape. Do the same with the second loop. Stack the smaller loop on top of the larger loop, both pinched at center.
Wrap the center piece around both loops tightly. Use your tapestry needle to stitch the wrap securely in place at the back. The wrap should be snug enough to hold the bow shape but not so tight that it distorts the loops.
Handle
The handle is worked around a core for extra structure. You can use a rope core, rolled fabric, or work around a purchased plastic handle form.
Ch 6. Join with sl st to form ring.
Round 1Ch 1, sc in each ch around. (6 sts)
Round 2to 80: Sc in each st around. Do not join rounds. Work in a continuous spiral. After approximately 15 rounds, begin inserting your core material and continue crocheting around it. The handle should measure approximately 12 inches when complete.Sl st to next st. Fasten off and weave in ends.Small Flower Charm Magic ring.
Part 11
Round 1Ch 1, 5 sc into ring. Pull ring closed. (5 sts)
Round 2(Ch 3, sl st in same st, sl st in next st) 5 times to create 5 petals. Fasten off, leaving a tail for attachment.
Assembly Instructions
Take your time with assembly. This is where your bag really comes together, and neat seaming makes all the difference.
Step 1: Create the Box Shape
Using a tapestry needle and matching yarn, whip stitch the bottom panel to the front panel along one long edge. Then attach the back panel to the opposite long edge of the bottom panel. You should now have three panels connected in a row.
Attach each side panel to the corresponding short edges of the bottom panel. Then seam the side panels to the front and back panels along their long edges. Your bag body should now form a box shape that stands up on its own.
Step 2: Attach the Flap
Position the flap along the top edge of the back panel, right sides together. Whip stitch securely along the top edge only. The flap should fold forward over the front of the bag.
Step 3: Install Hardware
Mark the center front of your flap where the turn lock will go. The leather tab included with most turn locks can be stitched or riveted directly through the crochet. Install the corresponding bottom piece of the clasp on the front panel, approximately 1 inch below the top edge.
Attach D-rings to each side panel near the top edge. You can crochet small tabs to hold these, or stitch them directly.
Step 4: Attach the Handle
Clip swivel clasps to your D-rings. Attach the handle to both swivel clasps. This allows the handle to be removable if desired.
Step 5: Attach the Bow
Position the bow on the front of the bag, centered and sitting just above the clasp. Use a tapestry needle to stitch the bow securely in several places at the back. Make sure it is firmly attached but that your stitches are invisible from the front.
Step 6: Add the Flower Charm
Use the tail from your flower to attach it near the clasp area, or attach it to a jump ring and clip it to one of the D-rings.
Optional Lining
For a truly professional finish, add a fabric lining. Cut fabric pieces slightly smaller than each panel. Sew together by machine or hand, then slip stitch the lining to the inside of the bag just below the top edges. Adding an interior pocket is a nice touch for keys or lip balm.
You can also insert plastic canvas or cardboard into the bottom before adding lining for extra rigidity.
Tips for Success
Tension is everything. Keep your stitches tight and consistent throughout. If you find yourself crocheting loosely, take breaks to reset.
Block your pieces. Wet blocking your panels before assembly helps even out any inconsistencies and gives sharper edges.
Use quality hardware. The turn lock and D-rings are visible design elements. Choose hardware with a finish you love. Antique brass, gold, and silver all work beautifully with this mustard shade.
Customize your color. This pattern works in any color. Imagine it in blush pink, classic black, cream, or navy. The structured design looks sophisticated in any shade.
More Crochet Bag Patterns to Try
If you love this structured handbag, you might also enjoy making a crochet clutch, crossbody bag, or market tote. The techniques you practiced here, like tight tension and neat seaming, will serve you well in any bag project.
Thank you so much for choosing this pattern! I truly hope you love making this bow handbag as much as I loved designing it. If you make one, please share a photo with me on Instagram or in our Facebook group. I would absolutely love to see your color choices and styling.
If this pattern inspired you, save it to your Pinterest boards so you can find it easily when you are ready to start. And please drop a comment below if you make this bag. Hearing from you always makes my day!
Finishing
- Weave in every tail securely, since dense cotton fabric shows loose ends more than looser gauges do.
- Seat the base piece, plastic canvas or cardboard, flat inside the bag before you close up the bottom seams.
- Attach the D-rings, swivel clasps, and turn lock clasp last, once the lining is settled, so the hardware sits square.
Why it works
The side panels work flat in single crochet with the same stitch count held from the first row to the last, so there is no shaping to track, just height.
The main bow piece is worked long and flat on purpose, then folded in half and whip stitched at the short ends, which turns a strip into a loop without any extra shaping rounds.
A second bow loop starts from its own chain rather than being cut from the first piece, which lets it sit at a different size inside the main loop to form the bow's knot.
What it becomes
- An everyday carry bag for errands, since the cotton fabric and base insert are built to hold weight without sagging.
- A market or day-trip bag, paired with the swivel-clasp handle for an over-the-shoulder carry.
- A considered handmade gift for someone who already carries a structured tote and would notice the bow detail.
Original pattern: https://crochr.com/dusty-rose-bow-handbag-free-crochet-pattern/
FAQ
Why use a 3.5mm hook on worsted weight yarn?
A smaller hook than usual tightens the stitches and removes the gaps you'd see with a standard worsted hook. That density is what lets the bag hold its shape without extra stiffening.
Do I need the lining fabric and base insert?
Both are listed as optional, but the base insert, plastic canvas or cardboard, is what keeps the bottom from dishing in. The lining is more about finish than function.
Can I use a different clasp or D-ring size?
You can, as long as it still closes the bag securely and fits where the turn lock clasp and 15mm D-rings are called for. Just confirm the leather tab width still matches your clasp.
How much yarn should I have on hand?
Plan for about 400 to 450 grams of worsted weight cotton or cotton blend. Cotton is specifically recommended here for the structure it gives the fabric.

